SPECIFICATIONS
| Attribute | Value |
| Steiner Brand | Adjust-A-Wall™ |
| Product Category | Adjust-A-Wall™ Curtain Wall Track and Roller Partition System |
| Product Type | Adjust-A-Wall™ |
| Material | Combination of transparent vinyl (tinted or clear) with vinyl laminated polyester curtain. Galvanized steel tracks with zinc plated steel hardware |
| Size | Custom |
| Special Feature 1 | Custom hardware, material, color, and configuration |
HOW TO ORDER A CUSTOM SYSTEM
How to order custom Adjust-A-Wall™ Systems:
- Determine Mounting Hardware - suspended, ceiling, wall or floor mount.
- Select curtain material and color combination (vinyl laminated polyester, tinted transparent, clear vinyl, or cotton duck). For material and color selection, refer to the Materials Available.
- Measure the required height (+/- 1" tolerance). Floors are not always leveled; take measurements from highest point of floor. Deduct 2" from height to allow for free movement of the curtain and prevent interference with the floor (to compensate for 1" track height and 1" hook length).
- Determine the configuration of the Adjust-A-Wall™ system: Straight run, two-sided “L” shape, three-sided “U” shape, four-sided enclosure, or multiple stations
- Provide description of the system. Sketches are always helpful.
- Determine the total number of linear feet required (running length).
- Select the Part Number from the table.
NOTE: Minimum 2" shall be deducted from curtain height to allow for the curtain to move freely. Normal tolerance is +/- 1". 10% is added to curtain width for proper drape.
MOUNTING METHODS& HARDWARE
Adjust-A-Wall is easy to install, and Steiner’s technical team will determine and provide all the necessary connectors, track and hardware based on the installation mounting method and configuration chosen.
SUSPENDED MOUNT
The most popular method of erecting Adjust-A-Wall™ Partition Systems is suspension mount. Track is hung from overhead (beams or trusses) supported from chain, cable, threaded rod or angle iron (not provided). Upon installation of chain or other supports, the appropriate track connectors (chain or threaded rod type) are attached to track at approximate 4' – 8' intervals to suspend the track. Once track is suspended in place at height desired, roller-hooks are inserted into track slot (1 roller per foot of curtain). Close track slot by installing end stop at each end of track. Hang the partition by inserting hooks through brass grommets along top edge of curtain. Curtains should reach approximately 1" or more above floor for smooth and fluid movement.
44201
Track Splice
44202
Right Angle
44203
3-Way T
Threaded Rod (3/8") Suspended
44701
Track Splice
44702
Track Bracket
44706
Threaded Rod Adapter
44200
Suspended
CEILING MOUNT
With this method of installation, the track is attached directly to the ceiling by mounting brackets flush to the ceiling, floor joists or to the bottom of a beam.
44100
Ceiling
44101
Track Splice
44102
Right Angle
44103
3-Way T
WALL MOUNT
For the Wall Mount installation method, track mounts are attached to walls above openings, or you can use wall end brackets to brace or stabilize the track.
44404
Track Splice (Up)
44401
Wall End (Down)
44402
Wall End (Up)
44403
Track Splice (Down)
FLOOR MOUNT
To install tracks using the Floor Mount installation method, you will need to erect custom-height columns attached to our heavy-duty 12" square floor bases, and install the appropriate track mounts to the top of each coumns..
44301
Track Splice
44302
Right Angle
44303
3-Way T
44306 - 6', 44307 - 7',
44308 - 8', 44309 - 9',
44310 - 10'
Columns
44320
12" Square Base
44300
Floor Mount
STRAIGHT TRACK SECTIONS, ROLLER HOOKS & ACCESSORIES
Additional accessories and track pieces are available to completely customize your installation.
44600
2-Wheel Nylon Roller-hooks
44705
Roller End Stop
44500
Track Splice
44003 - 3', 44004 - 4',
44005 - 5', 44006 - 6',
44007 - 7', 44008 - 8',
44009 - 9', 44010 - 10',
44011 -11', 44012 - 12'
Straight Tracks
PART NUMBERS FOR ORDERING
Custom partitions can be ordered with hardware, or replacement curtains only.
| Adjust-A-Wall™ Partition Systems |
| |
Custom Partitions
with Hardware |
Replacement
Curtains Only |
| Height |
Part Number |
| 6' |
AWSYS-06 |
AWRC-06 |
| 7' |
AWSYS-07 |
AWRC-07 |
| 8' |
AWSYS-08 |
AWRC-08 |
| 9' |
AWSYS-09 |
AWRC-09 |
| 10’ |
AWSYS-10 |
AWRC-10 |
| 11’ |
AWSYS-11 |
AWRC-11 |
| 12’ |
AWSYS-12 |
AWRC-12 |
| 13’ |
AWSYS-13 |
AWRC-13 |
| 14’ |
AWSYS-14 |
AWRC-14 |
| 15’ |
AWSYS-15 |
AWRC-15 |
| 16’ |
AWSYS-16 |
AWRC-16 |
| 17’ |
AWSYS-17 |
AWRC-17 |
| 18’ |
AWSYS-18 |
AWRC-18 |
| 19’ |
AWSYS-19 |
AWRC-19 |
| 20’ |
AWSYS-20 |
AWRC-20 |
| 21’ |
AWSYS-21 |
AWRC-21 |
| 22’ |
AWSYS-22 |
AWRC-22 |
| 23’ |
AWSYS-23 |
AWRC-23 |
| 24’ |
AWSYS-24 |
AWRC-24 |
| 25’ |
AWSYS-25 |
AWRC-25 |
MATERIALSAVAILABLE
Combination curtains are a configuration of any color vinyl laminate top and bottom, with a clear or ArcView™ tinted transparent vinyl center window. Choose from the color options below:
VINYL LAMINATED POLYESTER 13 OZ. FLAME RETARDANT OPAQUE VINYL
- Puncture, tear and abrasion resistant laminated polyester scrim
- Blocks most UV radiation and natural light
- Meets California Fire Marshal requirements, NFPA-701 Approved
- Flame, water and mildew resistant
CLEAR 16 MIL FLAME RETARDANT TRANSPARENT VINYL
- Does not block UV radiation and allows natural light into area
- California Fire Marshal compliant
- Flame, water and mildew resistant
ARCVIEW™ 14 MIL FLAME RETARDANT TINTED TRANSPARENT VINYL
- Blocks most UV radiation, yet allows some natural light into area
- Meets California Fire Marshal requirements
- Flame, water and mildew resistant
12 OZ. COTTON CANVAS DUCK
- Non-transparent to block UV flash, harmful rays and natural light
- Meets CPAI-84 for flame resistance
- Flame, water and mildew resistant
